Zumtobel - CATALOGUE - Special products

MINIUM LITE wall light
	Wall light, 1/39 W or 2 x 1/39 W T16, asymmetrical indirect distribution Extremely slim-line housing made of aluminium extrusion, natural anodised finish Cut end pieces in contrasting colour (dark grey) High operating efficiency of luminaire

ALW Active Light Wall
	Cube-shaped lighting box with front in variable colours Covered with semi-translucent textile membrane that can be printed on Extruded aluminium housing in white powder-coated finish 2 depths available: 250 mm and 488 mm Custom sizes Dimmable electronic ballasts with DALI control

Ergonomic illuminated handrail with intgral LED light line, IP44 rated, class of protection I
LED strip in warm-white or RGB
Designed for an illuminance of 100 lx in the center of a 1.80 m wide staircase
Two-piece construction made of hand-rail (upper section) and LED rail (lower section)
Wall-mounting set with feed-in facility (recommendation: 1 every 8 m)
Pre-wired ready for installation
Extruded aluminium section in a natural anodised finish
Custom lengths and mitres can be made on request

LED light tile, cascadable
Optimum LED configuration for uniform illumination
DALI control; DMX512 control optional
Model: white LED (dimmable vesion as standard) or RGB LED
Electrical power approx. 30 W
12 V DC power supply
Housing made of sheet steel, white powder-coated
Injection-moulded diffuser made of opal PMMA
High-quality all-round foamed waterproof polyurethane gasket for increased IP 54 requirements
Four-point fixing using slotted washers and spacer supplied

CONCRETE LIGHT
	Large-area RGB surface-mount luminaire without corners and edges 685 mm x 685 mm format with 4 x 3/14 W T16 RGB 685 mm x 1370 mm and 1370 mm x 1370 mm format available on request Dimmable electronic ballasts with DALI control Uniform, three-dimensional light distribution without visible shadowing White polyethylene diffuser without edging

CIRCUMFLEX
	Surface-mount/semi-recessed luminaire with organic lines Pearl diffuser cover edged in high quality aluminium cell membrane Option to fit additional halogen lamps Ceiling illuminated by circumferential perforation Tool-free re-lamping simply by pulling down the cover A range of shapes available on request

AIRBOARD
	Indirect/direct luminaire with transparent acoustic panel Sound absorbed by micro-perforated, optically transparent honeycomb section MPO lighting technology for maximum efficiencies Glare limitation: L < 1000 cd/m² acc. to EN12464 Particularly suitable for glare control for monitors having a large tilt angle Luminaire can be positioned freely regardless of desk positions

Indirect/direct pendant luminaire with organic lines
Transluscent plastic housing with integral MPO optic for directional, low-glare light on the working surface
Plastic housing comes in choice of white or brown
Backlit side lighting chambers made of transluscent plastic employing integral perforated reflector technology for a wide-beam indirect component combined with illumination of the lighting chambers
Suspension element included in pack
End sections made of high quality die-cast aluminium
Convenient, tool-free re-lamping

Circular luminiare for indirect/direct illumination, with swivel-mounted bracket
Fully flexible beam pattern
4/40 W T16-R electronic ballast
Direct component with prismatic optic, backed by diffuser pearl material
Luminaire head and arm pivoted at two points for 350° rotation in both axes
Radius of action approx. 1.30 m
Luminiare head, arm and ceiling rose made of aluminium in silver-look finish

SCORELINE

Pendant luminaire; dimensions: 2380 mm x 85 mm x 130 mm; length of pendant tube 400 mm; luminaire unit made of aluminium extrusion, all visible parts in titanium finish; power: 2 x 2/28 W direct, 2 x 1/28 W indirect; other wattages and lamps on request
Surface-mount. lum., in mounting section as recessed and semi-rec. luminaire; dimensions: 85 mm x 90 mm; lum. unit: alum. extrusion; all visible parts painted in titanium; lamps: T16, compact, QR58, spacing sections for var. mount. depth in semi-rec. lum.
Recessed section; dimensions: 130 mm x 108 mm;aluminium extrusion; supporting edge for flush-fitting in 12.5 mm plasterboard panels; lower edge tapered inwards ( smoothing edge ); spacers ensure rigidity during installation
Diffusers; darklight aluminium louvre, highly specular; opal diffuser, PMMA diffuser-pearl material; profiled for snapping into luminaire housing; QR58 LV halogen lamp module; with transformer; covered with louvre blades; lengths dependent on lamp used

Freestanding luminaire for workplace lighting with backlit luminaire heads
Indirect/direct distribution characteristic
Vibrant look thanks to fine variation in metal-coated finish
High operating efficiency of luminaire
Luminaire heads made of translucent PMMA
Rectangular, anodised aluminium tubular stand with integral switch
U-shaped round-tube section for outdoor installation of engine at distance from floor
3 m black connecting cable
SwitchDim (LST) model can be dimmed to 10 % using pushbutton switch

Pendant luminaire for workplace illumination with backlit luminaire body
Indirect/direct distribution characteristic
High direct component, with glare reduced by semi-translucent Darklight cellular louvre
Standard-compliant glare control L < 1000 cd/m² at 65 ° (Darklight)
Vibrant look thanks to fine variation in metal-coated finish
High operating efficiency of luminaire
Ultra-slim single-length or dual-length housing made of translucent PMMA
Slimline 1-lamp and wider 2-lamp model
Luminaire pre-fitted with suspension system and transparent power lead