TECTON

Continuous-row lighting system

A versatile and efficient continuous-row lighting system providing intelligent solutions for any lighting task, from
LED light lines to emergency lighting.

TECTON

Light for presentation and retail

SPAR supermarket, Murau / AT
Architecture: Veider Röthl Kaltenbrunner, Leoben / AT

TECTON

Light for industry and engineering

Sollich KG, Salzuflen / DE
Architecture: PODUFAL + WIEHOFSKY, Löhne / DE

TECTON

Continuous-row lighting system

Trunking
Continuous-row
LED system
T16/T26 continuous-row system
Luminaire elements
Emergency lighting
Lighting management
Overview
Trunking
Continuous-row LED system
T16/T26 continuous-row system
Luminaire elements
Emergency lighting, Lighting management

TECTON

Trunking

The floating base
 
 
  • The world’s first continuous-row lighting system to have an 11-pole current conducting section built into the trunking
  • All functions such as power supply, lighting control or connection to the emergency lighting system are completely integrated
  • The luminaires can be positioned flexibly, and the system can be adjusted to structural changes at any time
  • TECTON trunking as the functional basis, only the various luminaire elements, light sources or optics are replaced or added, if required

TECTON

Trunking

Continuous butt joint connector
Surface finish in
white or silver
5 connections for
power supply
(5 x 2.5 mm²)
2 control lines with DALI control signal for brightness control
(2 x 1.5 mm²)

Cable duct

Optional cable duct

4 poles for two independent emergency lighting circuits
(4 x 1.5 mm²)

TECTON

Efficiency combined with outstanding lighting quality

  • Split-lens technology
  • Consistent continuous-row system, without any visual interruption or different reflectors
  • LED system is 100% compatible with the entire TECTON product range – even T16 and T26 luminaires already in place can be replaced with a new continuous-row LED system easily and without any tools
  • Luminaire efficiency of up to 148 lumens per watt
  • Colour rendering index of Ra 80
  • Service life: after 50,000 hours of operation, as much as 90 percent of the initial luminous flux are still available
  • IP50 for LED and optic as standard

TECTON

The new standard at the installation site: 2 m continuous-row luminaires

Example of a 24 m continuous-row system
  • Up to 40 % shorter installation times
     
  • 25 % fewer individual luminaires
     
  • Less individual packaging and fewer parts at the installation site
     
  • Luminous intensity levels of up to 10,500 lm
     
  • Lightweight and perfectly fit to be mounted
    by one person

TECTON

Split lenses for homogeneous light emitting panels

Split-lens technology
 
  • The split lens directs the light from the centre to the lateral areas
  • The lighting pressure in the middle is reduced accordingly
  • The luminaire causes less glare without any negative effects on the light distribution curve
  • All known beam patterns can be implemented
  • The position of the LED is visible, but in contrast to conventional lenses, the light emitting panel is extended to the entire width
  • Thus clear gain in uniformity
The Wide Beam optic is equally suitable for decorative and technical tasks. Its medium wide-angle light distribution is perfectly suitable for lighting shelf surfaces and corridors. Areas where there is no shelving, such as production areas, for instance, are also illuminated uniformly.
Developed especially for use in industry and engineering, the Narrow Beam optic ensures uniform, efficient lighting of vertical shelf fronts. With a maximum mounting height of approx. 18 metres, rooms with medium and high ceilings are illuminated perfectly.
The Shelf Beam optic presents itself at its best in presentation and retail areas. Its symmetrical light distribution focuses on shelf surfaces; corridor areas are illuminated with less intensity. That way, people's attention is directed more strongly towards the goods on display.
Wallwasher: the asymmetrical beam pattern has been developed especially for presentation and retail areas with shelves set up at one side of the room. An unobtrusive reflector, which can be easily clicked into place without the use of any tools, selectively sets the goods displayed centre stage.
Split-lens technology
Wide Beam optic
Narrow Beam optic
Shelf Beam optic
Wallwasher

TECTON

Express assembly of individual reflectors

Example: TECTON LED CG reflector
 
  • Reflector CG (Controlled Glare) reduces glare to UGR index < 19
  • Meets the requirements with respect to standard-compliant glare control for applications such as supermarket checkout areas
  • Assembly via add-on clip
Add-on clip
 
  • Mounting clip provides plenty of design scope
  • Reflectors designed according to the customer's needs will change the lighting effect and the geometry of a TECTON LED luminaire – to create an individual stylistic idiom
  • Advantage on site: owing to the add-on clip, extra attachments can be mounted quickly and comfortably

TECTON

Microprismatic optic

  • With minimised glare through LED point reflexion of the task area, and when directly looking into the luminaire, the 1.5m long TECTON batten luminaire with MPO optic handles demanding visual tasks with increased requirements, e.g. at workstations for precision assembly, in laboratories, schools, supermarket check-out areas or offices
     
  • MPO optic provides for uniform light distribution, without the LEDs appearing as irritating individual light points
      
  • A gentle brightening of the ceiling and the lateral translucent optic make for a wide beam pattern with soft edges
      
  • LED lumen packages: 5500 lm, 6500 lm and 8000 lm
  • Colour temperature: 4000 K
  • Colour rendering: Ra 80
  • Also available with Tridonic industrial control gear
     
  • Design TECTON MPO LED Zumtobel

TECTON

Luminaire elements

  • The fully assembled MIREL evolution and ECOOS LED luminaires can now also be mounted on TECTON trunking
         
  • Trunking and luminaires are perfectly prepared for integration of emergency lighting and lighting management
         
  • For TECTON, the new luminaires open up new applications such as offices, meeting rooms or classrooms
          
  • MIREL evolution and ECOOS LED meet maximum requirements with respect to design, energy efficiency and visual comfort with maximum glare control
  • The CRAFT, LINCOR or PERLUCEmodels suitable for installation on TECTON trunking can be assembled particularly quickly and allow for easy electrical installation
  • Only one trunking unit is sufficient for secure fixing and the connection to the power supply and lighting control system
  • Luminaires already installed can be easily moved; additional luminaires can easily be clicked into place at the required position
  • Additional products for emergency lighting can also be integrated into the TECTON trunking
 
  • By allowing integration of Zumtobel's VIVO and IYON spotlight ranges, impressive lighting accents can be created
          
  • The lighting requirements for shops and retail spaces can be mastered with high efficiency: ranging from uniform illumination to impressive accent lighting using high-precision reflectors.
          
  • Installation is considerably facilitated by CLIX and plug-and-play mechanisms
Decorative luminaires
Adapter
Spotlights

TECTON

Chci se dozvědět více o TECTON
+
Výběr 
fam my fam

Zvolte si svůj náhled, prosím.

Nyní máte možnost nahlédnout přes políčko výběru fam do nabídkového katalogu fam nebo přes políčko výběru myfam vstoupit do konfiguračního režimu fam. Přes obě tlačítka volby se můžete vždy dostat do jiného náhledu.


  • myfam

    Zde se dostanete do našeho produktového konfigurátoru na úrovni rodin výrobků. Tato funkce umožňuje Vaše samostatné navolení či výběr žádaných volitelných vlastností fam. Díky tomu se o krok přiblížíte svému individuálnímu typu světla.

    myfam
  • fam

    Zde se dostanete do našeho nabídkového katalogu fam. Všechny typy fam z online-katalogu, které si můžete objednat, jsou uvedeny včetně příslušných listů s údaji a přídavnými informacemi.

    fam

subFam – filtrováno

subFam Text
Prvky přesahující rodinu výrobků
prvky FamilyName
Odlišující prvky
prvky ProductName
stáhnout
Výběr:  Standardní produkty
1 Phasenstrahler (mit Adapter und kurzem Vorsatzring)
Item
Provedení
Variant
L/B/H
TE
Bruttopreis excl. MWSt.
Obj. č.
sapName
01234567
Zubehör
Item
Provedení
 
Bruttopreis excl. MWSt.
ABC
Obj. č.
sapName 01234567

Legenda
Produkt uložit do seznamu poznámek Nový produkt
Předat do ecoCALC Vytřídit tabulkový náhled
Předat do DIALux
Předat do RELUXu
Dostupnost (nezávazně) z místa výroby:
A
Na skladě
L
19 pracovních dnů
V
9 pracovních dnů
C
Na vyžádání
Load sf_fehlt
  • (3)1/18W
  • (4)1/36W
  • (4)1/58W
Lampen
  • 765mit Lampen 765
  • 840Lichtfarbe 840

myproduct

Pomocí produktového konfigurátoru zvolte požadovanou konfiguraci z dostupných možností. Kusovníky můžete ukládat a posílat e-mailem.

share it

Jazyk katalogu

Podobné výrobky

Vyznamenání

Designéři

Fotografie aplikací

Newsletter


Chcete být informováni každý měsíc o nejnovějším vývoji LED, produktech a všem ostatním okolo společnosti Zumtobel? Zadejte svoji e-mailovou adresu a obdržíte uvítací balíček aktuálních informací.

ZEMĚ
SOCIAL MEDIA

LLP

Partner pro řešení osvětlení

Úspěšnější díky profesionálním a účinným řešením v oblasti osvětlení: Zumtobel poskytuje informace, podporu a kvalifikaci vybraným elektrikářům pro práci se světlem.
na portál LLP

LCP

Lighting Competence Program

Partnerský program společnosti Zumtobel pro projektanty elektrických systémů je zaměřený na spojení vašich a našich schopností, na maximální využití potenciálu osvětlení a současně zjednodušení každodenní projektantské činnosti.
na portál LCP

LDP

Lighting Design Program

Tento partnerský program společnosti Zumtobel byl vytvořený pro architekty, kteří tvoří pomocí světla a kterým poskytuje inspiraci, podporu a informace z první ruky.
na portál LDP
Další informace o programech