TECTON

Continuous-row lighting system

A versatile and efficient continuous-row lighting system providing intelligent solutions for any lighting task, from
LED light lines to emergency lighting.

TECTON

Referenzen

TECTON

Continuous-row lighting system

Trunking
Continuous-row
LED system
Luminaire elements
Emergency lighting
Lighting management
Overview
Trunking
Continuous-row LED system
Luminaire elements
Emergency lighting, Lighting management

TECTON

Trunking

The floating base
 
 
  • The world’s first continuous-row lighting system to have an 11-pole current conducting section built into the trunking
  • All functions such as power supply, lighting control or connection to the emergency lighting system are completely integrated
  • The luminaires can be positioned flexibly, and the system can be adjusted to structural changes at any time
  • TECTON trunking as the functional basis, only the various luminaire elements, light sources or optics are replaced or added, if required

TECTON

Trunking

Continuous butt joint connector
Surface finish in
white or silver
5 connections for
power supply
(5 x 2.5 mm²)
2 control lines with DALI control signal for brightness control
(2 x 1.5 mm²)

Cable duct

Optional cable duct

4 poles for two independent emergency lighting circuits
(4 x 1.5 mm²)

TECTON

Efficiency combined with outstanding lighting quality

  • Split-lens technology
  • Consistent continuous-row system, without any visual interruption or different reflectors
  • LED system is 100% compatible with the entire TECTON product range – even T16 and T26 luminaires already in place can be replaced with a new continuous-row LED system easily and without any tools
  • Luminaire efficiency of up to 149 lumens per watt
  • Colour rendering index of Ra 80
  • Service life: after 50,000 hours of operation, as much as 90 percent of the initial luminous flux are still available
  • IP50 for LED and optic as standard

TECTON

The new standard at the installation site: 2 m continuous-row luminaires

Example of a 24 m continuous-row system
  • Up to 40 % shorter installation times
     
  • 25 % fewer individual luminaires
     
  • Less individual packaging and fewer parts at the installation site
     
  • Luminous intensity levels of up to 16 000 lm
     
  • Lightweight and perfectly fit to be mounted
    by one person

TECTON

Split lenses for homogeneous light emitting panels

Split-lens technology
 
  • The split lens directs the light from the centre to the lateral areas
  • The lighting pressure in the middle is reduced accordingly
  • The luminaire causes less glare without any negative effects on the light distribution curve
  • All known beam patterns can be implemented
  • The position of the LED is visible, but in contrast to conventional lenses, the light emitting panel is extended to the entire width
  • Thus clear gain in uniformity
The Wide Beam optic is equally suitable for decorative and technical tasks. Its medium wide-angle light distribution is perfectly suitable for lighting shelf surfaces and corridors. Areas where there is no shelving, such as production areas, for instance, are also illuminated uniformly.
Developed especially for use in industry and engineering, the Narrow Beam optic ensures uniform, efficient lighting of vertical shelf fronts. With a maximum mounting height of approx. 18 metres, rooms with medium and high ceilings are illuminated perfectly.
The Shelf Beam optic presents itself at its best in presentation and retail areas. Its symmetrical light distribution focuses on shelf surfaces; corridor areas are illuminated with less intensity. That way, people's attention is directed more strongly towards the goods on display.
Wallwasher: the asymmetrical beam pattern has been developed especially for presentation and retail areas with shelves set up at one side of the room. An unobtrusive reflector, which can be easily clicked into place without the use of any tools, selectively sets the goods displayed centre stage.
Split-lens technology
Wide Beam optic
Narrow Beam optic
Shelf Beam optic
Wallwasher

TECTON

Express assembly of individual reflectors

Example: TECTON LED CG reflector
 
  • Reflector CG (Controlled Glare) reduces glare to UGR index < 19
  • Meets the requirements with respect to standard-compliant glare control for applications such as supermarket checkout areas
  • Assembly via add-on clip
Add-on clip
 
  • Mounting clip provides plenty of design scope
  • Reflectors designed according to the customer's needs will change the lighting effect and the geometry of a TECTON LED luminaire – to create an individual stylistic idiom
  • Advantage on site: owing to the add-on clip, extra attachments can be mounted quickly and comfortably

TECTON

Microprismatic optic

  • With minimised glare through LED point reflexion of the task area, and when directly looking into the luminaire, the 1.5m long TECTON batten luminaire with MPO optic handles demanding visual tasks with increased requirements, e.g. at workstations for precision assembly, in laboratories, schools, supermarket check-out areas or offices
     
  • MPO optic provides for uniform light distribution, without the LEDs appearing as irritating individual light points
      
  • A gentle brightening of the ceiling and the lateral translucent optic make for a wide beam pattern with soft edges
      
  • LED lumen packages: 5500 lm, 6500 lm and 8000 lm
  • Colour temperature: 4000 K
  • Colour rendering: Ra 80
  • Also available with Tridonic industrial control gear
     
  • Design TECTON MPO LED Zumtobel

TECTON

Luminaire elements

The CRAFT model suitable for installation on TECTON trunking can be assembled particularly quickly and allows for easy electrical installation. Only one trunking unit is sufficient to firmly secure the compact high-bay LED luminaire and connect it to the power supply and the lighting control system. With a simple turn of the wrist, additional products for emergency lighting can also be integrated into the reliable TECTON trunking with 11-pole current conducting section. Another benefit: luminaires already installed can be easily moved; additional luminaires can be clicked into place at the required position. In this way, the system can be adjusted to a new situation at any time.

CRAFT | LINCOR | PERLUCE

By allowing integration of Zumtobel’s IYON, INTRO, VIVO and ONICO spotlight ranges, the TECTON continuous-row lighting system is able to create impressive lighting accents while fulfilling all other tasks as well. Thus, the lighting requirements for shops and retail spaces – ranging from uniform illumination to impressive lighting effects using high-precision reflectors – can be mastered with high efficiency. Here, too, installation is considerably facilitated by CLIX and plug-and-play mechanisms.

IYON | INTRO | VIVO | ONICO

Decorative luminaires
Spotlights

TECTON

Dodatne informacije za TECTON
+
Izbira 
fam my fam

Izberite želen pogled.

Zdaj si lahko prek izbirnega polja fam ogledate kataloško ponudbo fam oz. prek izbirnega polja myfam vstopite v konfiguracijski način fam. Iz obeh izbirnih polj lahko preklopite v drug pogled.


  • myfam

    Tukaj je na voljo povezava do programa za konfiguracijo izdelkov na nivoju družine. Ta funkcija omogoča neodvisno izbiro oz. preklic izbire posameznih opcij za fam. Na ta način so vam posamezne svetilke še korak bližje.

    myfam
  • fam

    Tukaj je na voljo povezava na našo kataloško ponudbo fam. Vsem tipom izdelkov iz polja fam, ki se lahko naročijo iz spletnega kataloga, so priloženi pripadajoči tehnični podatki in dodatne informacije.

    fam
Izbira:  
fam myfam

subFam – filtrirano

subFam Text
Značilnosti družin izdelkov
značilnosti FamilyName
Izstopajoče značilnosti
značilnosti ProductName
Nalaganje
Izbira:  Standardni izdelki
1 Phasenstrahler (mit Adapter und kurzem Vorsatzring)
Item
Izvedba
Variant
L/B/H
TE
Bruttopreis excl. MWSt.
Št. naročila
sapName
01234567
Zubehör
Item
Izvedba
 
Bruttopreis excl. MWSt.
ABC
Št. naročila
sapName 01234567

Legenda
Shrani izdelek v beležnico Nov izdelek
Prenesi v ecoCALC Razvrsti v obliki tabele
Prenesi v DIALux
Prenesi v RELUX
Razpoložljivost (neobvezujoča) franko tovarna:
A
Na skladišču
L
19 delovnih dni
V
9 delovnih dni
C
Na zahtevo
Load sf_fehlt
  • (3)1/18W
  • (4)1/36W
  • (4)1/58W
Lampen
  • 765mit Lampen 765
  • 840Lichtfarbe 840

myproduct

Z uporabo programa za konfiguracijo izdelkov lahko iz prisotnih opcij izberete želeno konfiguracijo. Sezname delov lahko shranite in pošljete po e-pošti.

share it

Jezik kataloga

Podobni izdelki

Priznanja

Oblikovalec

Fotografije uporabe

E-časopis


Ali želite mesečno prejemati informacije o najnovejših razvojnih rešitvah s področja LED tehnologije, o najnovejših izdelkih in vse dodatne informacije v zvezi s podjetjem Zumtobel? Vpišite naslov vaše elektronske pošte in prejeli boste ekskluzivni pozdravni paket.

DRŽAVA
SOCIAL MEDIA

LLP

Partnerji za svetlobne rešitve

Več uspeha s pomočjo profesionalnih in učinkovitih svetlobnih rešitev: Podjetje Zumtobel izbrane električarje obvešča, podpira in usposablja na področju ravnanja s svetlobo.
na portal LLP

LCP

Lighting Competence Program

Partnerski program podjetja Zumtobel za načrtovalce elektroinštalacij je naravnan tako, da povezuje vaše in naše kompetence, s čimer lahko izčrpate potenciale svetlobe, hkrati pa vam poenostavi načrtovanje v vsakdanu.
na portal LCP

LDP

Lighting Design Program

Ta partnerski program podjetja Zumtobel je bil razvit za arhitekte, ki oblikujejo s svetlobo in v ta namen tukaj dobijo navdih, podporo in informacije.
na portal LDP
Več o programih