PERLUCE

Luminaires with extra protection

PERLUCE

Light for colours and shapes

PERLUCE

Setting objects vividly centre stage

PERLUCE

Light that makes children feel good

PERLUCE

Design

PERLUCE is inspired by the idea of a deliberately simple design, whose strength lies in its functionality and excellent logic of detail. The design is timeless, yet the forms and materials act as platforms for innovative technologies

Design: Stefan Ambrozus

PERLUCE

Platform for innovative technologies

Luminaires with higher protection are used whenever the primary requirement placed on a fit-for-purpose lighting solution is better protection and simpler maintenance. PERLUCE is a closed lighting system that sets new standards in terms of everyday usability and combines this with a variety of optics, IP50 and IP54 protection and various designs. Its deliberately utilitarian materials are reflected in its functional design. Its plain, unpretentious stylistic idiom gives precedence to the architecture of the room: light, not the luminaire, is the centre of attention.
PERLUCE | Linear luminaire with LRO optic

PERLUCE

Louvre optic and wallwasher

 

 

Light source           
T16                           

 

 

PERLUCE Wallwasher   PERLUCE’s optic with asymmetrical light distribution is not only especially well protected, it is also particularly efficient. With a light output ratio of 95 %, this luminaire is recommended for energy-efficient, long-term lighting solutions of the kind needed, for instance, in schools in order to illuminate blackboards. It not only illuminates vertical surfaces perfectly; visible luminance levels on the walls also increase people’s sense of well-being.
PERLUCE with louvre optic  The PERLUCE louvre luminaire makes it easy to perform demanding visual tasks, such as those in classrooms, workshops and laboratories, thanks to a perfect combination of efficient light distribution, sophisticated louvre technology and higher degrees of protection. Task areas are uniformly and efficiently lit with all-round glare control in conformity with applicable standards. The standardised louvre width for single-lamp and twin-lamp luminaires paves the way for a consistent look, even in situations where there are different lighting requirements.
Light source           
T16                          

 

 

PERLUCE

LRO and opale optic

Light source           
T16                          
LED___________

 

 

Light source           
T16                           
LED                          

 

 

PERLUCE with opal optic  The lighting unit distributes diffuse light uniformly throughout the room while at the same time gently brightening up the ceiling. This results in a friendly lighting atmosphere that is a pleasure to experience, especially in corridors, stairwells and adjoining rooms. The opal diffuser provides other benefits as well: its smooth surface is easy to clean and the light source remains hidden from direct view.
PERLUCE LRO  With its Luminance Reducing Optic (LRO), PERLUCE provides extra scope for creative design. The luminaire produces extremely glare-free light. This improves lighting comfort and creates ideal visual conditions, even with flat inclined displays – regardless where the luminaire is positioned relative to the workstation. This means that nothing stands in the way of flexible desk arrangements in offices and classrooms – and distracting glare is largely a thing of the past.

PERLUCE

Luminaire as a continuous row system

Continuous row system  In terms of installation options and mounting convenience, PERLUCE makes no distinction between individual optics. All models show their strengths both as individual luminaires and as a continuous row system. In both cases, the luminaire can be installed directly on the ceiling or mounted on a trunking unit. Replacing the fluorescent lamps remains simple, even in case of several luminaires being mounted butt to butt.

PERLUCE

PERLUCE Opal as a cluster

310 x 310 mm 
19 W LED
2 /18 W TC-L
1 /22 W T16-R
620 x 620 mm
50 W LED
4/14 W T16
More than the sum of its parts
Clusters of opal PERLUCE luminaires are an alluring eye-catcher; they are easy to implement and also very simple to look after and maintain. Where used as an individually combinable design element for ceilings and walls, the luminaire becomes a flexible modular system for delivering diffuse wide-area light – for example in order to provide higher illuminance levels in central areas of an entrance lobby or an underground car park. With just a few mounting points, the luminaire is easy to install and simple to maintain – even those luminaires that are located in the centre of a cluster.

PERLUCE

Circular luminaire - For ceilings and walls

Ø 450 mm
LED 30 W
Ø 350  mm
LED 22 W
Variable in all directions         
As a circular luminaire, PERLUCE is free from any geometrical constraints pointing into a particular direction or dictating any lines. Its round, self-contained design rather opens up all options of flexible arrangement – both on ceilings and on walls. The opal diffuser protects from glare and makes luminance levels visible. In this manner, the luminaire provides a pleasant form of orientation. Thus, the circular PERLUCE luminaire is up to the most varied tasks: from creating a welcoming atmosphere in long corridors or stairways to setting the lighting stage for open-design areas.

PERLUCE

Both simple and stable

Installation and maintenance   In daily use, PERLUCE proves that sophisticated lighting technology can go hand-in-hand with an easy-clean design. This is made possible by a robust housing and a sealed unit comprising optic and diffuser that locks in position precisely without the use of any tools. This protects both lamp and lighting technology, which in turn minimises maintenance and cleaning effort. This ensures that the luminaire operates very efficiently for a long time.

PERLUCE

Durability and efficiency

PERLUCE LED without cover,
600 x 600 mm

 

 

 

 

 

 

Efficient technology providing up to 100 lm/W and opal diffusers make a perfect match. Quality benefits include wide-area illumination and 100 % light immediately after the luminaire has been switched on. This major impact on efficiency becomes obvious in a direct comparison with T16 luminaires: LEDs consume only a fraction of the energy, which means that the investment will pay off within a short period of time. Due to a higher protection rating and a service life of 50,000 hours, PERLUCE LED stands out as a maintenance- free luminaire protected against soiling.
LED 38 W, 90 lm/W
LED 30 W, 92 lm/W
LED 18 W, 97 lm/W
1.520 mm
1.220 mm
620 mm
Ø 450  mm 
30 W LED 
90 lm / W
Ø 350  mm
22 W LED
75 lm / W
620 x 620 mm
LED 50 W  

310 x 310 mm
LED 19 W 
97 lm/W
PERLUCE LED opal
Design sizes Square/Linear/Round

PERLUCE

PERLUCE - a comparison

Day nursery 
PERLUCE LED

Day nursery 
PERLUCE T16

 

 

 

 

 

 

 

 

 

 

 

 

 

PERLUCE LED + lighting management
PERLUCE LED
PERLUCE 4 x 14 W T16
Amortisation of costs
Basic conditions T16 vs. LED____________
T16 luminaires
8 PERLUCE opal 4 x 14 W T16
Luminous flux of luminaire: 3 706 lm
Luminous efficiency of luminaire: 57 lm/W_____

LED luminaires
6 PERLUCE opal 50 W LED
Luminous flux of luminaire: 5 000 lm
Luminous efficiency of luminaire: 100 lm/W____

Lighting management system
DIMLITE DAYLIGHT with daylight-based control


Calculation period
20 years______________________________
The wide-area, pleasant lighting effect it creates makes PERLUCE LED ideal for flexibly used feel-good areas, like the day nursery used for this comparison. Perfect glare control in all directions encourages children to discover the world from every perspective.
PERLUCE LED + lighting management
PERLUCE LED
PERLUCE 4 x 14 W T16
Lighting quality
Empowerment
Visual comfort
Average energy consumption
per m2 and year
Investment costs vs.
operation costs (absolute)
Total CO2 
throughout service life (kg)

Potential savings
by efficient
LED lighting alone

Additional savings using
lighting management

remaining
energy consumption

T16 vs. LED
Energy consumption/costs

PERLUCE

Learn more about PERLUCE
+
Selection 
fam my fam

Please select your view.

Now you have two options: use the fam selection box to view the fam range offered in the catalogue, or access the fam configuration mode using the myfamselection box. You can always switch to the other view using the corresponding selection tab.


  • myfam

    Click here to go to the product configurator at family level. This function allows you to select or deselect fam options independently to get another step closer to your customised luminaire.

    myfam
  • fam

    Click here to view the fam range offered in the catalogue. All fam models that can be ordered from the online catalogue are listed here, including relevant data sheets and additional information.

    fam
Selection:  
fam myfam

subFam – filtered

subFam Text
Common features
features FamilyName
Differentiating features
features ProductName
Loading ...
Selection:  
Standard Products myfam
1 Phasenstrahler (mit Adapter und kurzem Vorsatzring)
Item
Version
Variant
L/B/H
TE
Preis
Ord. no.
sapName
01234567
Zubehör
Item
Version
 
ABC
Ord. no.
sapName 01234567

Key
Save product in wish list New product
Transfer to ecoCALC Product with eco+ label
Transfer to DIALux Sort tabular view
Transfer to RELUX
Availability (non-binding) ex works:
A
Managed at warehouse
L
19 business days
V
9 business days
C
Upon request
ZS_SCU_F_1fl_V2A

Product is also available in individual configurations

Option

  • Schaltungsart
  • Electronic
  • Notlicht
  • Schutzklassen
  • Umgebungstemperatur
  • Durchgangsverdrahtung
  • Verschlüsse
  • Lampen
Product configure
Load sf_fehlt
  • (3)1/18W
  • (4)1/36W
  • (4)1/58W
Lampen
  • 765mit Lampen 765
  • 840Lichtfarbe 840

share it

Catalogue language

Product filter / OFFON

Similar products

Awards

Designers

Application photos

Newsletter


Would you like to receive monthly information about the very latest LED developments, products and other useful facts about Zumtobel? Enter your e-mail address and get your exclusive information pack.

Product configuration
  • Load
  • Lamp
  • Schaltungsart
  • Electronic
  • Notlicht
  • Schutzklassen
  • Umgebungstemperatur
  • Durchgangsverdrahtung
  • Verschlüsse
  • Lampen
  • Availability ?
  1. Product version code:
  2. Code:
Product enquiry

In case of interest, please contact your Zumtobel sales representative indicating the code. If you are no Zumtobel customer yet, please address your enquiry to Configuration_Request@zumtobelgroup.com. In that case, we would require your name, company and telephone number, apart from the product code, to process your enquiry.

Data sheet as PDF Download as TXT file
close
Download as TXT file
  • Loadsf_required
  • Lampsf_required
  • Schaltungsart
  • Electronic
  • Notlicht
  • Schutzklassen
  • Umgebungstemperatur
  • Durchgangsverdrahtung
  • Verschlüsse
  • Lampen
» start new configuration
47 110 815
Product enquiry Product details
---
Configuration incomplete
COUNTRY
SOCIAL MEDIA

LSP

Lighting Solution Partners

Greater success due to professional and efficient lighting solutions: Zumtobel provides its partners with information, support and qualifications in dealing with light.
Go to LSP portal

LCP

Lighting Competence Program

The Zumtobel partner program for electrical consultants aims at combining their and our competences, thereby exploiting lighting potential and making every-day planning and design work easier.
Go to LCP portal

LDP

Lighting Design Program

This Zumtobel partner program has been developed for architects who use light for creative design and want to use first-hand information, support and inspiration for that purpose.
Go to LDP portal
Read more about the programs